Testing your internet speed can be a great source of information. For example, you can use it to gather the capabilities of your network hardware, test the effect of a network protocol such as OpenVPN on your network, etc. It is, therefore, an excellent tool for network troubleshooting.
Using Speedtest CLI
The Speediest-CLI is one of the most popular and powerful tools to test your internet speed from the terminal. It powers sites such as speedtest.net, which allows you to perform an internet speed test from your browser.
https://github.com/sivel/speedtest-cli
To install the speedtest-cli, run the apt command:
sudo apt-get install speedtest-cli
You can also run the tool as Python script. Install it with pip:
sudo pip3 install speedtest-cli
Or:
sudo easy_install speedtest-cli
Once installed, you can perform a speedtest from your terminal by running the command:
speedtest
The command should detect your network location and perform a speed test from the nearest server. An example output is provided in the block below:
Retrieving speedtest.net configuration...
Testing from Anonymous Networks (34.68.75.28)...
Retrieving speedtest.net server list...
Selecting best server based on ping...
Hosted by Future Technologies (Omaha, NE) [12.44 km]: 27.316 ms
Testing download speed................................................................................
Download: 1509.54 Mbit/s
Testing upload speed........................................................................................
Upload: 576.02 Mbit/s
You should see your download and upload speeds in Megabits. If you do not wish to view all the test details including ping, you can run the command in simple mode:
speedtest --simple
Output:
Ping: 26.532 ms
Download: 1464.64 Mbit/s
Upload: 594.05 Mbit/s
Using the Fast CLI Utility
You are probably familiar with fast.com. A simple speed test service provided by Netflix. Luckily, it provides u CLI utility we can use to perform a speed test from the terminal.
The utility is based on Node.JS, hence, you may need to install Node and NPM on your system.
Install Node.js with the command:
curl -fsSL https://deb.nodesource.com/setup_19.x | sudo -E bash - &&\
sudo apt-get install -y nodejs
Finally, install fast-cli:
$ sudo npm install --global fast-cli
Once the installation is complete, you can perform a speed test with the command:
fast
2000 Mbps ↓
The command should return the download speed for your connection.
To show the download and upload speed, run:
fast -u
2000 Mbps ↓ / 1000 Mbps ↑
Using iPerf
There is one defect tool when it comes to network testing, including features such as transfer speed, network throttling, etc.
It is therefore a great tool when you need to test the speed of LAN connection.
Start by installing perf with the command:
sudo apt-get install iperf3
Once installed, open run the iperf server on machine you just installed the perf tool. The command is as provided:
iperf3 -s
This launches a server that listens for incoming connections from the client.
-----------------------------------------------------------
Server listening on 5201
-----------------------------------------------------------
In a machine connected to the same local network, run the command:
iperf3 -c <ip_address_to_server>
Enter the ip address of the iperf server. You can check the IP for your server with the command:
ip addr | grep -i inet.*brd
Example output:
inet 10.128.0.4/32 brd 10.128.0.4 scope global dynamic ens4
Locate the IP address and run the command as shown in the example below:
iperf3 -c 10.128.0.4
The command above will connect to the server and perform the tests. On the client side, you should see an output as shown:
Connecting to host 10.128.0.4, port 5201
[ 5] local 10.128.0.4 port 47330 connected to 10.128.0.4 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 3.42 GBytes 29.4 Gbits/sec 0 3.18 MBytes
[ 5] 1.00-2.00 sec 3.56 GBytes 30.6 Gbits/sec 0 3.18 MBytes
[ 5] 2.00-3.00 sec 3.49 GBytes 30.0 Gbits/sec 0 3.18 MBytes
[ 5] 3.00-4.00 sec 3.49 GBytes 30.0 Gbits/sec 0 3.18 MBytes
[ 5] 4.00-5.00 sec 3.56 GBytes 30.6 Gbits/sec 0 3.18 MBytes
[ 5] 5.00-6.00 sec 3.50 GBytes 30.0 Gbits/sec 0 3.18 MBytes
[ 5] 6.00-7.00 sec 3.52 GBytes 30.2 Gbits/sec 0 3.18 MBytes
[ 5] 7.00-8.00 sec 3.22 GBytes 27.6 Gbits/sec 0 3.18 MBytes
[ 5] 8.00-9.00 sec 3.34 GBytes 28.7 Gbits/sec 0 3.18 MBytes
[ 5] 9.00-10.00 sec 3.50 GBytes 30.0 Gbits/sec 0 3.18 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 34.6 GBytes 29.7 Gbits/sec 0 sender
[ 5] 0.00-10.04 sec 34.6 GBytes 29.6 Gbits/sec receiver
iperf Done.
The above displays the transfer speeds for your local network.
On the server side, you should see an output as provided below:
Accepted connection from 10.128.0.4, port 47324
[ 5] local 10.128.0.4 port 5201 connected to 10.128.0.4 port 47330
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 3.27 GBytes 28.1 Gbits/sec
----- output missing ----------------------------
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate
[ 5] 0.00-10.04 sec 34.6 GBytes 29.6 Gbits/sec receiver
End!
End
Congrats! You have discovered three main methods you can use to perform an internet speed from your terminal session.
Let us know which tool you found most useful and comfortable to use down in the comments.
If you enjoy our content, please consider buying us a coffee to support our work:
